Blog

R&J Components is an authorized distributor for Genteq capacitors.(formerly GE capaciotrs)   They offer an extensive line of capacitors such as: Oil-Filled, Motor Run, HID Lighting, General Purpose, Dry: Motor Run, Motor Start, HID Lighting, Electrolytic: Screw Terminal, and Snap-In.

These capacitors are used in a wide variety of industrial applications.

Refrigeration, HVAC, Hermetic, Agriculture, Food and Beverage, Lighting (high intensity), Manufacturing, Medical, Oil and Gas, Pool and Spa, Power Systems, Transportation, Uninterruptable Power Supplies, Power, Factor Correction, Power Conditioning, Welding Machines, Appliances, Air Compressors, Elevators / Escalators, Wind, Energy, ATM Machines, ECM Motors ,Drives (Elevators, Escalators, Wind Energy, UPS Systems, and Power Conditioning.

We have the experience to offer equals or crosses to the value you are looking for, that may not be available, or has a long lead time.

With the introduction of Marco’s Thermoplastic Single and Double Row Closed Back Terminal Blocks, Marco has become one of the most relied upon sources of Military and Commercial Barrier-Type Terminal Blocks.

Military Terminal Blocks have the same construction features as commercial variety and are available in materials type GPT-30F per MIL-M-24519, color gray, and are designated to Military Specifications MIL-T-55164/C Class B. 

Commercial (UL-CSA) as well as Military approvals (MIL-T-55164/C) are held by all Marco Terminal Blocks

Military Series MIL-T-55164

• 37TB, 38TB, Class B
• 40TB, 41TB, Class B
• 37TB, 38TB, 39TB Class F
• 40TB, 41TB, 42TB Class F
• 3TB, 4TB, 6TB, 7TB, 8TB, 9TB Navy Class
• 10TB, 15TB, 16TB, 17TB, 25TB, 26TB Navy Class
• Military Marker Strips

Nichicon releases a new Film Capacitor for Power Electronics called the ER Series.  This Dry type DC Filter Capacitor is maintenance free and is currently the smallest of it’s size in the industry*. This capacitor can be used for indoor or outdoor applications when used in an enclosed environment. (*Based on Nichicon research, Oct. 2013)

Features

• Oil less for better environment
• Resin-molded type with safety mechanism (Aluminum Case)
• Maintenance-free (Long life, high reliability)

Applications

• Industrial equipment
• Inverter smoothing circuit
• Railway-car
• Motor control devices
• Power conversion equipment
• Wind & Solar power systems

Volex is a leading provider of interconnect solutions and power products. Voles has served the telecommunications, datacoms / data-centre, industrial, consumer and medical market for over 100 years.

Volex's range of interconnect solutions include original-design fibre-optic, high-speed copper and radio frequency (RF) cable assemblies With design and manufacturing facilities across the globe, Volex has the flexibility to meet time your deadline at competitive pricing.

A binding post is a versatile connector that allows a temporary or semi-permanent connection between electronic devices or circuits.

The contact surface clamp washer, against which the wire or lug is clamped by the head, is an integral part of the stud and not a force-fitted separate washer.  This avoids possible electrolytic corrosion across the mating faces due to current through the interface and subsequent increase in noise, galvanic EMF and resistance.  The cross-hole is drilled at right angles to a key-flat on the clamp washer in the screw machine, assuring absolute angular alignment of the finished post to the keyed flat in the instrument panel. Press-on base washers can have a much as five or ten degrees of angular misalignment.

The behind-panel backup insulting washer is made of solid plastic, which reduces cost and increases insulation from flashover voltage of the post.

A flat metal washer is provides as a bearing surface for the nut against the backup washer.  This washer can be used without the insulating backup washer, if it is desired, to ground the post to the panel.

The Hakko FX-888 is an inexpensive but durable temperature adjustable soldering station that provides more power and takes up less workbench space than its predecessor, the Hakko 936.

The added power of the Hakko FX-888 provides up to a 30% increase in operator productivity due to the increased thermal performance and faster thermal recovery time. Today, workbench space is at a premium, and the FX-888 uses approximately 35% less surface area compared to the Hakko 936.

Features Adjustable temperature control with lock/set screw Temperature range of 200-480°C (392-896°F) Maintains an idle temperature within ±1°C (1.8°F) Ceramic heating element and sensor ensure rapid heat-up temperature and fast thermal recovery Dial display shows °C or °F Temperature adjusted by simply turning the dial Slender iron handles are padded and have an ergonomic design for comfort and ease of use Wide selection of tips available for soldering SMD and through-hole applications

ATC is a QPL Approved Supplier for MIL-PRF-55681/4 and /5 products. The Military Products Manual covers the general requirements for established reliability fixed, multilayer, unencapsulated, monolithic porcelain and ceramic dielectric capacitors.

Military QPL Approved Products

• ATC CDR Military Products are QPL approved to MIL-PRF-55681
• ATC Porcelain and Ceramic Multilayer Capacitors:
  • High capacitance values available
  • Tighter tolerances

ATC offers military approved high frequency BP characteristic (NPO), fixed ceramic chip capacitors in standard EIA sizes. This offering consists of 0402, 0603 and 0805 industry standard case sizes in accordance with DSCC Drawings 05003, 05002 and 05001 respectively. This product is offered in several tested grades. The standard offering is supplied with Group A inspection per MIL-PRF-55681.

Sofasco International designs and manufactures CE certified AC & DC axial fans, blowers, centrifugal & cross flow fans for electronic cooling applications. Established in 1981, the company maintains factories in Taipei and Kaohsiung Taiwan; Ningbo, ShenZhen and Guangdong Province, China; as well as Hong Kong, SAR and Korea. 

Industries

• Computer manufacturing sector
• Railcar and bus manufacturers
• Commercial and general aviation OEM’s
• Medical equipment manufacturers
• Hospital operating facilities
• Food processing industry
• HVAC
• Electrical & electronic OEM’s
• Photovoltaic industry
• Military, aviation and aerospace